In the recently published, ‘Materials with enhanced adhesive properties based onacrylonitrile-butadiene-styrene (ABS)/thermoplastic polyurethane (TPU) blends for fused filament fabrication (FFF),’ authors A.S. de Leon, A. Dominguez-Calvo, and I. Molina outline a recent project where they created new materials with refined properties for 3D printing. In this study, they examine the compatibility of thermoplastics and thermoplastic elastomers on both the macro- and micro-scale.
While enhanced materials offer new potential in Fused Deposition Modeling (FDM, also called FFF), the authors are also aware of numerous obstacles to overcome, some of which are in comparison to conventional methods, along with the typical issues regarding mechanical properties such as decreased tensile strength and defects caused by porosity.
“Different strategies have been followed to overcome these problems,” stated the researchers. “Finite element analysis has been made to map the forces distribution when different external loads are applied to be able to predict the fractures modes and locations.”
Adhesion issues are common for users today, and as the authors point out, there is also a ‘lack of consensus’ regarding how to measure such problems, along with testing solutions such as varying position of prints, exploring the influence of build direction and raster orientation, modifying materials, and experimenting with additives. The research team also noted issues in FDM technology due to constrictions like requirements for a heated platform, with a possible solution in using thermoplastic elastomers (TPE) for better adhesion.
And while ABS and TPU may show good results when blended, for this research, the scientists decided to forego blending, and print the materials separately on a Creality CR10 3D printer, using a series of ABS/TPU blends, comprised of TPU contents from 10 to 30 percent wt%. Five samples were printed using ABS and TPU, and no support structures, using default software parameters.
“It can be observed that TPU characteristic peaks increase proportionally with the TPU content in the blends,” stated the researchers. “This is a first indication of good compatibility between ABS and TPU in the blends, since we cannot identify separated regions of ABS and TPU, at least within the spatial resolution of the Raman laser. To investigate more in detail the chemical composition of the ABS:TPU blends, XY Raman mappings of the blends were performed.”
In examining the compositional distribution of the objects printed, the research team was able to confirm that all the blends did offer a homogeneous distribution of ABS and TPU.
“AFM phase images showed that when TPU content is 10 wt%, it is homogeneously distributed within the ABS matrix, while for blends containing 30 wt% TPU, it tends to form a continuous phase along the ABS matrix,” concluded the researchers. We have correlated this compositional study with the mechanical properties observed in tensile testing specimens printed by FFF. We state that the presence of TPU increases interlayer adhesion (bonding strength) between printed layers while it does not decrease the yield strength value for contents up to 20 wt%.
“For blends containing 30 wt% TPU this adhesion is also enhanced, but yield strength is more like pure TPU than ABS. However, this high content of TPU leads to enhanced adhesion onto the printing platform allowing to keep it at room temperature. Thus, we conclude these blends are promising candidates as materials with enhanced adhesion (between layers and to the platform) to be used in FFF. Due to their commercial availability and simple preparation of the blends, we believe these materials are particular interesting for large-scale, industrial applications as an alternative to pure ABS.”
Adhesion issues have spurred on many different studies today, from experimenting with a range of different filaments to new heatbed solutions, and improvements for use within industries like construction.
What do you think of this news? Let us know your thoughts! Join the discussion of this and other 3D printing topics at 3DPrintBoard.com.[Source / Images: ‘Materials with enhanced adhesive properties based onacrylonitrile-butadiene-styrene (ABS)/thermoplastic polyurethane (TPU) blends for fused filament fabrication (FFF)’]
You May Also Like
The Do’s and Don’ts of Additive Manufacturing
The best-use cases for 3D printing aren’t always obvious. When designing an object for additive manufacturing, it’s important to keep the limits and benefits of the process in mind. These...
5 Professional Finishing Options for FDM Parts
Despite the advances of other technologies, Fused Deposition Modeling (FDM) remains the go-to 3D printing process for prototypes and simple plastic parts. It’s fast, it’s cheap, and there are thousands...
The Advantages of 3D Printing
In recent years, 3D printers have taken the manufacturing industry by storm. From automobiles to computer parts, products made by 3D printers have undoubtedly played a big role in the...
3D Printing Being Combined with Soldering to Create High-Performance Zeolites
Researchers in China are exploring the use of minerals called zeolites, hoping to harness ‘desirable configurations’ via 3D printing and soldering, which is further outlined in ‘Fabricating Mechanically Robust Binder-Free...
View our broad assortment of in house and third party products.