MIT: Automated System Designs and 3D Prints Optimized Actuators and Displays to Spec

Share this Article

Actuators are complex devices that mechanically control robotic systems in response to electrical signals received. Depending on the specific application they’re used for, today’s robotic actuators have to be optimized for a variety of features, such as appearance, efficiency, flexibility, power consumption, and weight, and all of those parameters have to be manually calculated by researchers to find the right design; add 3D printing with multiple materials to make one product and things get even more complicated. This obviously leaves a lot of room open for human error.

But, a team of researchers from MIT – which knows a thing or two about 3D printing actuators – developed an automated system that can design and 3D print actuators that are optimized to many specifications. Basically, this system is completing a task that’s too complex for researchers to do the old school way.

“Our ultimate goal is to automatically find an optimal design for any problem, and then use the output of our optimized design to fabricate it. We go from selecting the printing materials, to finding the optimal design, to fabricating the final product in almost a completely automated way,” stated Subramanian Sundaram PhD ’18, a former graduate student in MIT’s Computer Science and Artificial Intelligence Laboratory (CSAIL).

Overview of the specification-driven 3D printing process. The structure of individual actuators (or the arrangement of multiple actuators) is optimized using a multiobjective topology optimization process. The optimization uses the bulk physical properties of the individual materials and the functional objectives as inputs. The generated optimized voxel-based representation of the structure is used by the printer to fabricate the optimized structure using a drop-on-demand inkjet printing process. A rigid acrylate polymer (RIG), an elastic acrylate polymer (ELA), and a magnetic nanoparticle (Fe3O4)/ polymer composite (MPC) are the materials used. The contrast in the optical, mechanical, and magnetic properties is used to simultaneously optimize the visual appearance and actuating forces while generating voxel-level design.

Sundaram is the first author of a paper, titled “Topology optimization and 3D printing of multimaterial magnetic actuators and displays,” that was published in Science Advances; additional authors are former MIT postdoc Melina Skouras; David S. Kim, a former researcher in the Computational Fabrication Group; Louise van den Heuvel ’14, SM ’16; and Wojciech Matusik, head of the Computational Fabrication Group and an MIT associate professor in electrical engineering and computer science.

To show how their system works, the researchers used it to make actuators that show two black-and-white images at different angles. When it’s flat, one actuator shows a Vincent van Gogh portrait, but tilted at an angle once it’s been activated, the image shifts to Edvard Munch’s famous painting “The Scream.” Another example they created are 3D printed floating water lilies, which feature petals that have actuator arrays and hinges that fold in response to magnetic fields that are run through conductive fluids.

When multiple materials are used to 3D print one product, the design’s dimensionality gets pretty high.

Sundaram explained, “What you’re left with is what’s called a ‘combinatorial explosion,’ where you essentially have so many combinations of materials and properties that you don’t have a chance to evaluate every combination to create an optimal structure.”

Three polymer materials were customized with the specific properties of color, magnetization, and rigidity that were needed to build the actuators, producing an opaque flexible material used as a hinge, a brown nanoparticle material that responds to a magnetic signal, and an almost transparent rigid material. Then, the characterization data is added into a property library, and the system draws from this to assign various materials to fill different voxels. Grayscale images, like the flat actuator which displays van Gogh’s portrait until it’s tilted into “The Scream,” are used as system input.

Panel optimization for both optical and mechanical properties, given a pair of target grayscale images.

Then, through a sort of trial and error process, 5.5 million voxels are “iteratively reconfigured” in a simulation to match a specific image and “meet a measured angle.” If the arrangement of voxels doesn’t portray the target images, both at an angle and straight on, an error signal tells the system which voxels are correct and which need to be changed. For example, if the brown magnetic voxels are shifted, removed, or added, the actuator’s angle will change when a magnetic field is applied, but how this alignment will affect the target image must also be taken into consideration.

A computer graphics technique called “ray-tracing,” which simulates the path of light interacting with objects, was used to compute the appearances of the actuators at each iteration. These simulated beams shine through the actuator at each voxel column, which can contain over 100 voxels. If an actuator is flat, the beam produces a dark tone by shining down on a column with lots of brown voxels. But when it’s tilted, misaligned voxels will be illuminated, and clear voxels may shift into the beam, while brown ones move away, so a lighter tone appears.

“We’re comparing what that [voxel column] looks like when it’s flat or when it’s titled, to match the target images. If not, you can swap, say, a clear voxel with a brown one. If that’s an improvement, we keep this new suggestion and make other changes over and over again,” explained Sundaram.

The MIT system uses ray-tracing to align both light and dark voxel columns in the appropriate spots for the flat and angled images. Eventually, after a few to dozens of hours and 100 million iterations, the correct placement of each material in each voxel is found to generate two images at two angles.

A custom 3D printer with drop-on-demand inkjet technology is used to make the actuator. Tubs of the different materials are connected to print heads with individually controlled nozzles, and the designated material is dropped, layer by layer, into each of the voxels.

Sundaram says their work could be a step in the right direction for designing large structures like airplane wings. Actuators that have been optimized for appearance and function could also be used for biomimicry in robotics.

Sundaram  said, “You can imagine underwater robots having whole arrays of actuators coating the surface of their skins, which can be optimized for drag and turning efficiently, and so on.”

Discuss this and other 3D printing topics at 3DPrintBoard.com or share your thoughts below.

[Source/Images: MIT]

Share this Article


Recent News

UK Heart Patient Undergoes Rare Surgery for 3D Printed Titanium Sternum

Interview with Edi Weigh of 3D Printing Service FacFox



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

Sponsored

The Do’s and Don’ts of Additive Manufacturing

The best-use cases for 3D printing aren’t always obvious. When designing an object for additive manufacturing, it’s important to keep the limits and benefits of the process in mind. These...

Sponsored

5 Professional Finishing Options for FDM Parts

Despite the advances of other technologies, Fused Deposition Modeling (FDM) remains the go-to 3D printing process for prototypes and simple plastic parts. It’s fast, it’s cheap, and there are thousands...

Sponsored

The Advantages of 3D Printing

In recent years, 3D printers have taken the manufacturing industry by storm. From automobiles to computer parts, products made by 3D printers have undoubtedly played a big role in the...

3D Printing Being Combined with Soldering to Create High-Performance Zeolites

Researchers in China are exploring the use of minerals called zeolites, hoping to harness ‘desirable configurations’ via 3D printing and soldering, which is further outlined in ‘Fabricating Mechanically Robust Binder-Free...


Shop

View our broad assortment of in house and third party products.


Print Services

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Join our mailing list to receive the latest news and updates from our 3DPrint.com.

You have Successfully Subscribed!