Researchers in China are exploring the use of minerals called zeolites, hoping to harness ‘desirable configurations’ via 3D printing and soldering, which is further outlined in ‘Fabricating Mechanically Robust Binder-Free Structured Zeolites by 3D Printing Coupled with Zeolite Soldering: A Superior Configuration for CO2 Capture.’
The concern of the authors is that 3D printing is simply not enough, due to issues with mechanical properties—along with absorption problems and diffusion kinetics challenges. For this study, they attempt to construct robust zeolite monoliths for use in practical applications. In conventional work, zeolite crystals are usually included in smaller structures such as pellets, for industrial fabrication. An optimized configuration is usually required, however, due to potential issues such as slow heat transfer, substantial pressure drops, and other obstacles to functionality. Traditional ‘strategies’ usually include deposition of zeolite powder onto foams, alloys, or even cordierite; or, using self supports via freeze casting, templating, crystallization, and other types of processing.
Previously 3D printed zeolites have been limited due to mechanical strength:
“The tradeoff among mechanical strength, mass loading of active zeolites, and diffusion kinetics remain a challenging hurdle for the practical application of 3D-printed structured zeolites. Thus, it is highly desirable to develop a facile strategy to fabricate 3D-printed binder-free hierarchically structured zeolites with merit of fusing mechanical robustness, fast mass diffusion, and high zeolite loading for the practical pressure/temperature swing adsorption.”
The research team created a proof-of-concept study, developing binder-free NaX zeolite monoliths (ZM-BF) with the following features:
- Robust mechanical integrity
- Hierarchical structure
- Outstanding CO2 adsorption capacity
3D printing and traditional hydrothermal crystallization were successfully fused in creating high-performance zeolites in:
- Gas separation
- Other advanced applications
To strengthen the 3D printed zeolite monolith, the researchers used a printing ink with 14 wt% HNTs in the study.
“The addition of appropriate amount of colloidal silica as extra silicon source was to inhibit the transformation of HNTs into zeolite A,” stated the researchers. “The mixture was stirred thoroughly for 2 hours, followed by sonication to ensure homogeneity and avoid air bubbles. By using the above printing inks, a nozzle settled at a 3D printer was employed to print predesigned geometry via a layer-by-layer route. The as-prepared ZM-P was then freeze-dried to prevent partial shrink and collapse, followed by calcination at 650 °C to enhance the mechanical stability and form abundant macropores by removing the HPMC matrix.”
With the introduction of halloysite nanotubes, the research team is able to combine ‘robust-interfacial HNT bridges’ with the crystals—successfully turning them into a connected network of bonds, allowing them to further meet their goal of strengthening the mechanical stability.
“The dynamic breakthrough tests demonstrate the superiority of ZM-BF over commercial benchmark NaX zeolites for selectively capturing CO2 from flue gas, nature gas, and biogas. To the best of our knowledge, this 3D-printed binder-free zeolite monolith is the first case of structured zeolites that fully overcomes the trade-off among mechanical strength, diffusion kinetics, and adsorption capacity,” concluded the researchers.
“We believe that the ‘3D printing and zeolite soldering’ strategy of current study may afford a versatile pathway for designing and fabricating other binder-free hierarchically structured zeolites, which may open more advanced applications of 3D-printed zeolites not only in adsorption but also in other areas such as catalysis and sensoring.”
3D printing users around the world continue to battle the challenges of diminished mechanical properties amidst innovation, and many meet with success in a variety of different projects, from examining porosity to studying biocompatibility, to using different techniques like heat treatment. What do you think of this news? Let us know your thoughts! Join the discussion of this and other 3D printing topics at 3DPrintBoard.com.[Source / Images: ‘Fabricating Mechanically Robust Binder-Free Structured Zeolites by 3D Printing Coupled with Zeolite Soldering: A Superior Configuration for CO2 Capture’]
You May Also Like
Harvard Researchers Developing a New Way to 3D Print Organs
Imagine your own heart for a second. Then try to figure out how many cells it has. It’s not that simple. Some cells are very easy to spot while others...
Sharing Knowledge With CELLINK’s Ambassador Program
Creating a sharing ecosystem for research projects in bioprinting is key to making scientific findings reproducible and enabling fellow scientists and engineers to contribute to the evergrowing biotechnology community worldwide. With...
Interview with Seok-Hwan You of Rokit Healthcare on Bioprinting
When Seok-Hwan You founded Rokit Healthcare the company was one of the first worldwide to be able to 3D print PEEK and other high-performance materials. It quickly grew to dominate...
Charles River Associates International on Bioprinting
Charles River Associates International is a company that advises governments, law firms, and companies on weighty strategic matters and issues related to specific expertise that the company has. CRA may...
View our broad assortment of in house and third party products.